Ningbo Jiazheng Machinery Co., Ltd

SPECIFICATION		JZW2280PET
INJECTION UNIT
Screw Diameter	mm	60
Screw L/D Ratio	L/D	25
Shot Size(Theoretical)	cm³	780
Injection Weight(PS)	g	826
Injection Rate	g/s	273
Plasticizing Capacity	g/d	49
Injection Pressure	Mpa	147
Screw Speed	rpm	0~180
CLAMPING UNIT
Clamp Tonnage	KN	2280
Toggle Stroke	mm	480
Space Between Tie Bars	mm	510×510
Max. Mold Height	mm	550
Min. Mold Height	mm	200
Ejector Stroke	mm	140
Ejector Tonnage	KN	65
Ejector Number	Piece	9
OTHERS
Max. Pump Pressure	Mpa	16
Pump Motor Power	KW	22
Heater Power	KW	16.5
Machine Dimensions(L×W×H)	m	5.7×1.5×2.2
Machine Weight	t	6.9
Hopper Capacity	L	50
Oil Tank Capacity	L	320
Platen Dimensions Face
Platen Dimensions Side
Machine Dimensions

Control System

1.TFT LCD color display

2.Useing high-speed DSP processors, time-control precision up to 1ms

3. High-precision displacement sensor system, the control precision of ± 0.2mm

4. Using fuzzy forecasting techniques, temperature control accuracy of ± 1 ℃

5.Multi-channel input / output ports, port function can be configured

6.With output programmable function

7.Support USB and network interface (optional)

8. Parameter date protection locks, and auto-save feature with the power

9.Super-capacity data storage capabilities

Injection Device

Clamping Device

1. Double cylinder balanced injection system

2.Double cylinder beach move (above medium machine)

3.Multi-step injection pressure of injection / speed & positioning 　　 control

4.Multi-step pressure of injection/ speed & positioning control

5.High torque oil motor drive screw preplastication device

6.Screw flow-extend protection device

7.The temperature of barre is controlled by computer PID

8.Ceramic heating barrel device

9.Cooling temperature control system for barrel outet

10, Screw speed detection device (optional)

1.Oblique-row double toggle mechanical mold clamping mechanism

2. Siamesefront-link overall casting

3.Mechanical, hydraulic, electrical full interlock protection (above medium 　　 machine)

4.Low-pressure mold protection device

5.Multi-step clamping pressure / speed & position control

6.Multiple hydraulic ejector device

7.High speed mold clamping device

8. Mould cooling water shunt

9.Neutron device standard interface

10.Automatic centralized lubrication system

11.Opening/closing moulde,jection position controlled by scale

12.Automatic mould adjustment (optional)


Professional plasticizing and injection solutions	Balanced twin cylinder injection system	Double guide pin linear guide bearing

Hydraulic System
1.The manual plug valve hydraulic system make the machine having quick and smooth motion response 2.Double proportional valve control pressure flow 3.Hydraulic oil cooling device 4.High-performance imported hydraulic unit with optimizing allocation 5.The fuel has a big opening hole so can be cleaned easily

Uitimate energy effciency of servo power-save injection Molding Machine

JZD servo injection molding machine is equipped with a high-performance servo motor power control system, the output power of the servo motor changes with the load changes, there is no waste of excess energy, the load stage motor to reduce the speed, low energy consumption, Work, energy consumption is zero, to improve the injection accuracy at the same time, a substantial energy saving, water saving, reduce noise. The real realization of the hydraulic injection molding machine a new revolution.

The output power changes with the load changes, there is no waste of excess energy. The servo motor reduces the speed, the energy consumption is extremely low, and the motor does not work during the cooling stage, and the power consumption is zero. According to the different products, servo energy-saving injection molding machine compared to traditional injection molding machine to save electricity 20% to 80%, to bring you real power to enjoy, significant economic benefits.

Product